Posted in | News

Quarterly Research Report on Netherlands Metals

Download PDF Copy

Nov 20 2009

Research and Markets (http://www.researchandmarkets.com/research/9607db/netherlands_metals) has announced the addition of the "Netherlands Metals Report Q4 2009" report to their offering.

Netherlands Metals Report provides industry professionals and strategists, corporate analysts, metals associations, government departments and regulatory bodies with independent forecasts and competitive intelligence on the Netherlands' metals industry.

Dutch steel and aluminium producers are experiencing a sharp downturn in demand amid the Netherlands' economic crisis and are unlikely to return to pre-recession levels over the foreseeable future, according to the latest Netherlands Metals Report.

In the first seven months of 2009, Dutch crude steel production fell 45.7% year-on-year (y-o-y) to 2.42mn tonnes. Monthly production hit a low-point of 288,000 tonnes in January and remained at around 320,000-340,000 tonnes in February-June. However, July saw a surge in output to 497,000 tonnes which, while down 17.9% y-o-y, was a significant rise, assisted by the resumption of production at Corus's IJmuiden blast furnace to satisfy a rise in orders. A rise in automotive sales increased demand, with IJmuiden - at a total output capacity of 7mn tpa - a key supplier of hot rolled, cold rolled and metallic coated steels to car producers and automotive suppliers. In August, Tata Steel, Corus's parent company, stated that it would raise its European production capacity utilisation from 50% to 80%, providing yet more hope of an upturn in output. Most of this upturn is attributed to an improvement in export markets rather than domestic orders. Meanwhile, demand for long products has stabilised at a low level, and while that for stainless steel longs is growing, prices are still under pressure in this segment.

Despite the positive signs mid-year, the Dutch economy is unlikely to recover until early 2010 and the country's steel industry will rely on European orders to stand a chance of securing growth. Given the Netherlands' dependence on the export sector, much will depend on the external outlook. However, the outlook is not entirely encouraging. We are forecasting a 4.4% contraction in the eurozone this year, with weak growth of just 0.4% in 2010. Germany and France's forecasts have been revised up slightly on the back of more encouraging Q209 real GDP data, but growth in Spain and Italy will remain sluggish at best. As such, the authors believe the July output figures are likely to be the peak in 2009, with the scrappage programmes that revived sales in the car market across Europe largely coming to an end in Q309. This report forecasts crude steel output of 4.17mn tonnes in 2009, a fall of over 39% from 2008. Stabilisation and the beginning of a recovery in 2010 should help stimulate output with growth of 18.5% to 4.93mn tonnes, which is still low by historical standards. Meanwhile plans to raise annual capacity at the Vlissingen aluminium smelter by 30,000 tonnes per annum (tpa) to 290,000tpa by the end of 2009 are likely to be put on hold until the European market recovers to 2007 levels of demand.

The authors doubt that output will recover to pre-recession levels over the next five years, raising the prospect of permanent capacity closures. Automotive production, a major market for Dutch steel and aluminium, is likely to be mostly concentrated on small cars and to be limited to 1.90mn units by the end of 2013. This will in turn limit domestic demand for steel and aluminium flat products. As for the European markets, the autos manufacturing body Association des Constructeurs Européens d'Automobiles (ACEA) estimates that by the end of 2009 the Western European market will have contracted by at least 8% due to the financial crisis. Most other Western European markets have stagnated or fallen considerably as a result. Consequently, there is little sign of a revival in metals demand from this industry.

Key Topics Covered: