Section Forming and Fabricated Sections

In addition to the supply of structural fixings, Ancon is a leading supplier of stainless steel sections and flooring.

Stainless steel sections can be fabricated or cold formed in a wide range of shapes.

Stainless steel floorplates and open grid flooring are ideal for applications requiring corrosion resistance, hygiene and low maintenance.

Section Forming

Computer controlled press brakes enable Ancon to produce a wide range of section shapes up to 5m in length and from 2mm to 20mm in thickness.

Typical Shapes Include:

• Angle Sections
• Zed Sections
• Channel Sections
• Lipped Channel Sections

Ancillary Operations

Sections can be offered with a range of ancillary operations including laser profiling, welded stiffeners, punched holes or slots and curves. Products can be supplied with a specific surface finish to suit the requirements of the application. Services available include electro-polishing and bead blasting.

Fabricated Sections

Ancon also produces stainless steel fabricated sections. Fabrication personnel are routinely coded to BS4872 and in addition are regularly approved to BS EN 287 to weld to the procedures specific to BS EN 288.

Typical Shapes Include:

• I Sections
• T Sections
• Hollow Sections

This information has been sourced, reviewed and adapted from materials provided by Ancon Building Products.

For more information on this source, please visit Ancon Building Products.